Let's Just Build a House!: DIY Simple Patio Table Details

I promised you the plans to our DIY patio table this week...

But I lied. You are not getting them today. Turns out, Google SketchUp takes some time and patience. And I have neither lately.

Plus, I have been putting in some extra hours at my real life job this week. (It is month end gahhh!) So really, all I want to do is come home and have a big glass of wine after work. So sorry. No plans, just details for now.
I will probably finish the plans up and post them at a later date.

Honestly, it was a pretty simple build. If you are even a little handy you can probably look through these photos and figure it out...we just made most of it up as we went along.
Took less than 2 hours, and $60 bucks---including the stain!

Materials used

Seven salt treated 2x6's
Four salt treated 4x4's
One salt treated 2x4
Thompson's deck and patio stain in "banjo brown"

Total cost: $58.00

This is the making it up part happening right here...me telling him what I do and don't like and Adam telling me if it is really even possible...most of my ideas were apparently redic. I do understand furniture building.

and now some measuring before the cutting..

Here we (FIY: when I say "we" in the this post it really means Adam) sort of made a frame around the bottom of the table top. This would give the table a much smoother look... dress it up a tad.

Adam cut up a 2x4 and fastened them to the underside of the table top. This will secure the boards so they won't shift later with any weather conditions. Although they are salt treated for all weather...you never know.

Now the legs!

you can see he secured the legs by cutting up more of the 2x4. Just to stabilize them a bit.

After 2 long hours of hard labor...the build is finished and time to test it out with a brew.